
ServicesWindow Retrofitting
Window Retrofitting in La Mirada
We remove the old sashes and tracks, keep the sound frame already in your wall, and set a new custom-sized window into it. Your stucco and interior trim stay put. The work is cleaner, and most homes are finished in a day or two.
How retrofitting works and who it suits
With a retrofit, your new window is made to sit inside the frame that's already in the wall. We pull out the old glass, sashes and tracks, clean the frame, and set a new vinyl window with a flush or Z-bar fin that hides the old frame edge outside. Because nothing is cut from the wall, you avoid stucco patches and fresh paint around each opening.
This approach works well when the existing frame is still solid and square, as it often is with the aluminum sliders found on many 1950s and 60s homes around La Mirada. When a frame is bent, corroded through or letting water into the wall, we'll say so directly and walk you through full-frame window replacement as the better option.
Many calls start with a mishap: a ball through a pane, a break-in, or glass cracked during a storm. When that happens, we photograph the damage and put in writing exactly what we would replace, giving you clear records if you choose to open a claim with your insurer.
What your retrofit includes
- Measurements taken at several points
- Older frames are seldom perfectly square, so we measure each one across the top, middle and bottom. Your windows are made to those exact figures instead of a stock size padded with filler.
- Taking out the old windows cleanly
- We lift out the old glass, sashes and tracks without cutting stucco or drywall. Floors and furniture near each opening get covered, and we take the old units with us.
- A square, weathertight fit
- Every new window is leveled, shimmed, fastened and sealed along the fin. On the inside we finish the edge with caulk or trim so it looks clean.
- The right glass for each room
- Standard glass is dual-pane with a low-E coating, and we can use privacy glass in bathrooms or tempered glass wherever code calls for it. Our Energy Efficient Windows page goes deeper on glass choices.
- A written estimate with photos
- You see an itemized estimate and photos of each opening before we start. If you are filing an insurance claim, that is the kind of documentation adjusters typically request.
- Permits taken care of
- If your job needs a permit, we file for it and book the inspection ourselves, so there's nothing for you to chase down.
Signs it's time to retrofit your windows
Old sliders that drag or come off the rails
Worn-out rollers and bent aluminum tracks make old sliders a struggle to open and easy to pop out of place. That's frustrating every day and a weak point for security.
Haze trapped inside the glass
A cloudy film between the two panes of dual-pane glass means the seal has broken. The insulating space has stopped working, and no amount of cleaning will clear it.
Rooms that overheat later in the day
Single-pane aluminum lets the sun's heat pass right through. If your west-facing rooms turn uncomfortable on summer afternoons, the windows are a large part of the cause.
Wet frames and dark spots in the tracks
Water collecting on cold aluminum frames on winter mornings leads to mildew in the tracks and stained sills.
Glass that's cracked or broken
Whether the crack came from an impact or the house settling, it's a sensible moment to upgrade the whole window. If insurance may be involved, we document the damage before anything comes out.
What to expect from start to finish
- 1
Free in-home estimate
The visit to your home costs nothing, and nobody will push you or expect you to commit. We look over each frame, measure and photograph every opening, and tell you which ones suit a retrofit and which need full-frame work.
- 2
Your windows are made to order
Once you approve the written estimate, we order windows built to your measurements. When they arrive, we set an install day that works around your schedule.
- 3
Installation day
Drop cloths go down first, and we finish one window before opening the next, so only one spot in your home is ever open to the outside. Each unit is set, sealed and checked to slide and lock smoothly.
- 4
Cleanup and final walkthrough
We vacuum the sills and tracks and haul away the old glass and frames. Then we walk through each window with you, showing how the locks work and how to keep the glass clean.

What moves the price of a retrofit
Your retrofit price depends mainly on how many openings you have, how big they are and which window you pick. Each of those shows up as its own line on your written estimate, so nothing is hidden in a lump sum. Ask us about our offer of $495 per window with free installation, which has a four-window minimum and some glass size and product restrictions.
- How many windows, and how big
- Each extra opening adds a window to build and an hour or two of labor, and bigger panes cost more to make. Handling the whole house in one visit is usually a better use of your money than spreading it over several trips.
- The style you choose
- Basic sliders go in most easily. Casements, large picture windows and odd shapes take extra build time and more careful fitting.
- Glass upgrades
- Low-E coatings, privacy glass and tempered panes near tubs or doors each carry their own cost. We'll show you which openings need tempered glass by code.
- What shape the old frame is in
- Light cleanup of a solid frame is already in the price. A frame too damaged to hold a retrofit means that opening moves to a full-frame install, which runs higher.
- Reaching the window, and permits
- Upstairs openings, narrow side yards or dense shrubs can slow the crew down. If a permit is needed, its fee is listed separately so you can see it.
Common questions about window retrofitting
Something not covered here? (562) 564-6374
Will I lose any glass when the new window goes in?
A little. The new unit sits inside your existing frame, so a thin band around the edge of the glass is covered. Today's vinyl frames are narrow, and most people notice the clearer view more than the small change in size. We bring a frame sample to the estimate so you can judge for yourself.
Does a retrofit save as much energy as a full-frame install?
The window is the same product in both cases, so it performs the same. When the fin and the inside edge are sealed well, a retrofit comes very close overall. Full-frame work earns its extra cost mainly when the old frame is failing or letting water into the wall.
Will my insurance cover new windows after damage?
It might, depending on your policy and how the damage happened. Coverage decisions belong to your insurer, and we don't act as your adjuster. What we can do is photograph the damage, note what we find and give you an itemized written estimate to send along with your claim.
Do I have to be home while you work?
We ask that you be there when we arrive and again for the final walkthrough. Most of the work happens outside, but the crew needs to reach each window from inside to seal and finish the interior edge.
How long will the job take?
Figure on an hour or two for each window. A typical house is done in one or two days, and the count of openings plus how easy they are to reach decides which end of that you land on. We'll give you a realistic schedule when we measure.

Let's take a look at your windows
We'll check your frames, measure every opening and photograph any damage, then hand you a clear written quote. We work in La Mirada and nearby towns like Whittier, La Habra and Norwalk.